7000 Lumens Brightness in Standard Mode
1280 x 800 (WXGA) Native Resolution
16:10 Native Aspect Ratio
HDMI, DVI-D, and DisplayPort Inputs
VGA, Component, and Composite Inputs
Panasonic Digital Link Support
RS-232C and Ethernet Controllable
Audio Input/Output and 10W Speaker
Auto Brightness Mode Extends Lamp Life
3-Chip 0.76" / 19.30 mm LCD
WXGA - 1280 x 800
WUXGA - 1920 x 1200 VGA - 640 x 480
NTSC NTSC 4.43 PAL M PAL 60 PAL N SECAM
1920 x 1080p @ 60 fps 1920 x 1080p @ 30 fps 1920 x 1080p @ 25 fps 1920 x 1080i @ 60 fps 1920 x 1080i @ 50 fps 1920 x 1080p @ 24 fps 1280 x 720p @ 60 fps 1280 x 720p @ 50 fps 1280 x 720p @ 30 fps 1280 x 720p @ 25 fps 720 x 576p 720 x 576i 720 x 480p 720 x 480i
DLP Link 3D
F 1.7 - 2.3 (f = 26.9 - 45.4 mm)
Vertical: ±60% Horizontal: ±10%
1.7 - 2.8:1
40 - 400" / 101.60 - 1016.00 cm
Yes, Vertical: ± 40° Yes, Horizontal: ± 30°
Rear Screen Projection
Yes, 10 W (Mono)
1x DVI-D Video (Input) 1x HDMI Audio/Video (Input) 1x DisplayPort Audio/Video (Input) 1x 15-pin VGA Video (Output) 1x 5-BNC Video (Input) 1x RCA Composite Video (Input) 1x RCA Stereo (L/R) Audio (Input) 2x 1/8" (3.5 mm) Mini Audio (Input) 1x Ethernet Control (Input/Output) 1x RS-232C Control (Input) 1x 1/8" (3.5 mm) Mini Remote (Input) 1x 15-pin VGA Video (Output) 1x 1/8" (3.5 mm) Mini Audio (Output)
Normal Mode: 37 dB Eco Mode: 31 dB Quiet Mode: 29 dB
100-240 VAC, 50/60 Hz
Normal Mode: 575 W Standby Mode (Normal): 10 W Standby Mode (Normal): .3 W Standby Mode (With Audio Output ON): 37 W
Operating 32 to 104°F (0 to 40°C) Humidity: 20 - 80%
20.9 x 7.0 x 17.5" / 530.0 x 177.0 x 445.0 mmwith supplied lens
23.4 lb / 10.61 kg with supplied lens
Box Dimensions (LxWxH)
25.5 x 23.2 x 12.1"
The PT-EW730ZU 3LCD WXGA Multimedia Projector from Panasonic features the standard zoom lens which has a throw ratio of 1.7 to 2.8:1, and can also work with other lenses from Panasonic, including short- and long-throw options. An installation class model, it outputs a brightness of 7000 ANSI lumens in standard mode (up to 7500 lumens in maximum) and features a native resolution of 1280 x 800 (WXGA) - other input resolutions are supported through scaling. Thanks to the flexibility of the lens system, the projector is suitable for deployment in a wide range of applications, including corporate conferences rooms, trade shows, houses of worship, lecture halls, medical imaging, and more.
Six video inputs allow you to connect the PT-EW730ZU to just about any source, digital or analog. For computers and digital HD equipment there is a DisplayPort input, an HDMI input, and a DVI-D (digital only) input. A VGA input is provided for legacy analog computer sources, and there is a 5-BNC hybrid analog input for RGBHV, Component, Y/C (adaptable to S-video), or Composite. There is also a dedicated Composite RCA input and a total of three analog audio inputs; one on 2-RCA and two on 3.5mm mini jacks. Uncompressed video (and RS-232C control) can also be input through the Ethernet port when connecting to Panasonic Digital Link-compatible HDBaseT equipment. There is a 10 W mono speaker for audio output, and there is a variable audio output on a 3.5mm mini jack for connecting amplified speakers or a separate sound system.
The PT-EW730ZU includes an IR remote and there is an IR extender port in case the projector is installed in such a way clean line-of-sight communication is not possible. It can also be remotely operated using RS-232C for use with automation and control systems like Crestron (with two inputs provided) or via Ethernet using either Panasonic control software or a regular Web browser.
Interchangeable Lens Design with Standard Lens Included
Featuring an interchangeable lens design, the projector includes the standard lens, a motorized zoom lens with a 1.7 to 2.8:1 throw ratio. Additionally, it is compatible with a range of separately available lenses from Panasonic, including short throw, zoom, and long throw options.
A beamsplitting prism sends red, blue, and green light through three 0.76" monochrome LCD displays to render a video image. 3LCD design features no moving parts in the imaging system (although there is still a cooling fan) for an estimated 10,000 before first maintenance; and is free of the "rainbow effect" artifact sometimes perceived on colorwheel-based systems.
7000 Lumen Lamp
A single UHM type lamp provides 7000 lumens brightness in normal mode, and is estimated to last 3000 hours running at full brightness (4500 hours in Eco mode). To determine the ideal brightness level for your application, you will need to take into account the screen width, distance from the projector to the screen (throw distance), amount of ambient light near the screen, and the reflectivity (gain) of the screen surface used.
16:10 Native Aspect Ratio
This projector features a 16:10 native aspect ratio. This is considered a widescreen format, and comes very close to the 16:9 standard of HDTV. This format is ideal if you plan to show HD video, and can still be used for presentations - though in the case of PowerPoints some extra space may be leftover on the sides. The projector can show 4:3 too; however black bars (pillaring) will have to be applied, or the image will have to be stretched or cropped to fit.
Up to 5000:1 Contrast Ratio
By dynamically adjusting the brightness, this projector can achieve an effective contrast ratio of up 5000:1. Factors such as the presence of ambient light, type of screen material, and the nature of the images being shown may reduce this figure
With this feature engaged, the projector will try to lower the brightness (up to 70%) whenever possible - such as during a dark scene - to extend lamp life. Color shift correction is employed to compensate for the shift in white balance as the brightness is modulated
Side-by-Side and Picture-in-Picture
For giving presentations or video conferencing you can show two images at once. Either picture-in-picture, where a smaller image is superimposed over the main image with the sub-window placeable in any of the four corners. Or you can place both images side-by-side giving them equal precedence.
Panasonic Digital Link technology with HDBaseT Support
Based on Valens HDBaseT technology, this hybrid interface allows the control (RS-232C) and an uncompressed digital HD video signal to be carried over a single Ethernet cable (CAT5e or higher) up to 328'. The receiving device must also support HDBaseT - interoperability with regular baluns is not assured. Note: Digital Link requires a "homerun" connection between the two terminating devices or routing over dedicated HDBaseT hardware. It is not suitable for use with conventional IP networking infrastructure.
Ethernet and RS-232 Controllable
An RS-232 port means the projector can be controlled from a computer or with an automation system such as Crestron. Through the Ethernet port it can be controlled from a computer using Panasonic proprietary software or a Web browser.
Tunes detail and contrast levels to optimized settings for viewing medical imaging such as X-rays
15,000 Hour Filter
The filter is estimated to last 15,000 hours and can be replaced by the end-user
Information, prices and images are subject to change without notice. NJ Accessory is not responsible for typographical or illustrative errors. Manufacturer rebates, terms, conditions, and expiration dates are subject to manufacturers printed forms.